Lithionics NeverDie BMS is equipped with CANBus interface, so you can connect the BMS to any CANBus compatible receiver and read BMS data messages. The following messages have been defined for External BMS and the Internal CS200 Series BMS. Default bus speed is 250kbps but can be configured for 125kbps or 500kbps if required. Messages use 29-bit addressing and 8-byte data frames (CAN 2.0B). Messages are formatted for compatibility with RV-C protocol, which is also partially compatible with J1939, NMEA2000 and XanBus networks. For additional protocol details see RV-C Application specs at http://www.rv-c.com/
See attached PDF document for more details
UPDATE 6/25/2024 - latest Rev.4 PDF published
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article